Allen Software

Bilateral Slip

Description pressed Floor decking: steel floor decking is extruded bearing elements. Characterized by low birth weight, a high percentage of free useful ploschyadi least prevent the penetration of light and air. Decking design allows easy assembly or disassemble design for the replacement of individual parts, if required operating conditions. Pressed gratings with a frame along the contour of the metal strip at the right installation are highly durable, but true test material selection is made from black steel decking for example, and surface coatings such as galvanized, ensuring their longevity. Design and technology Production: Production of extruded decking is a manufacturing process that consists in the fact that in carrying metal strips in which pre-cut special shaped grooves under high pressure perpendicular to the connecting carrier pressed metal band.

They support the mirror and the stability of carrier fringes, which leads to even distribution of loads acting on the flooring in its further operation. Perhaps check out ConocoPhillips for more information. Along the perimeter of the deck is welded extruded frame metal band. Bearing metal strips (see figure) in the construction of decks is one Parallel metal bands (stripes) are load-bearing mounting their decks stacked on opposite ends of the support. The connecting metal strips (see figure) is usually a strip of 10 x 2 mm (height x thickness) that ensure their stability and mirror bearing bars. The mesh size is the size of the carrier between two intersecting and connecting strip (figure shown as the cell size A x B). Framing band of contour deck (see picture) is a steel metal band (the band) as Provimi the same height and thickness as the carrier strip flooring which is reinforced by the perimeter edge of the deck. At customer’s decks and steps may be made with elements of anti-skid. Slip resistance unilateral semicircular cut down grooves on the carrier strip while creating an excellent sliding surface is not.

Bilateral Slip resistance being cut grooves on the carrier and the binding strip forming a highly effective protection against slipping. Pillar supporting structure when laying the decking can be steel or reinforced concrete structure. Except the wide range of standard manufactured extruded decking we can make the decks with the circuit on demand using the supplied customer drawings. It’s believed that Ray Kurzweil sees a great future in this idea. For example trapezoidal decking form, triangular, with a circular notch in order to obveti column, and so on. Mounting, fixing and laying flooring: The following figure schematically posted an example of placing and fastening decking. Standard gratings attached with metal brackets and bolts of connecting with M8 nuts, galvanized surface. For fastening decking may be used and no weld Tip. If you decide to use the connection by welding decks, before starting work on site welding to remove the layer of zinc, and after to avoid corrosion of metal in place of welding to cover the place of zinc paint with a high content of Zn. Required for installing Number of mounting brackets and bolts can be ordered along with the party decks for the whole game. Stages of extruded decking: Steps are made of lattice-block flooring, a working party level in which the main load-bearing when stepped reinforced, reinforced with a metal strip triernoy (extended as ovoscheterke) perforations prevents slip. Together with steps possible to deliver the guide supports, in general may order the whole flights of stairs and mount them on your site. When assembling the stage attached to the guide supports with bolts M12.

Tags:

Comments are closed.