Wooden furniture of the most familiar, environmentally clean, and generally pleasing to the eye and touch. However, moisture and time of doing their job, gradually polished or lacquered wood furniture comes in disrepair. Cracking paint, scratches on the polishing, all trace of time, and sometimes poorly maintained wooden furniture. Restoration, repair and restoration of damaged wood products can go in several ways. The first way – change appearance of products. For example, the decorative covering plastics, the very same that okleivayut furniture made of pressed wooden plates.
Colors range from plastics such metallic and fluorescent, to imitations of real wood. To cover the wooden furniture with plastic sheets to keep in mind that the easiest way to work with the details, but not with a product. Measure out and cuts out plastic with an allowance of 2 – 4 mm, and glue, following the manufacturer's instructions. Sometimes it is necessary between wood and plastic to lay a protective layer which prevents the rapid deterioration of the coating. The second option – cover special paints, "wood" or any other colors. This option is suitable, if the wooden surface was marred by some caustic dye, and cleaning to nothing lead. Or if you want to change the color of the furniture is radical, not using the tapes and plastic. As an option – to try to give Shanghai a leopard for Mexican jerboa, ie create an imitation of mahogany, for example.
For this tree thoroughly cleaned, oshkurivaetsya, covered with primer. Thereafter applied directly to the paint and varnish. The third option – the restoration of the subject. The restoration involves reconstruction under the maximum appearance and properties of an object without changing the decorative elements and colors. It the most interesting and challenging work with older subjects. Depending on the availability on the product and inlaid with forged parts, which may have to order, preliminary sketch. The very same job with the tree will be include the following: Will you leave footprints drevotochtsami (sometimes it adds value to the subjects), the removal of old varnish, polish, remove stains and scratches. Successive polishing or restoration lacquered surfaces. To complete the authenticity of the product will work on old technologies, long and carefully. Damage on the polished surface, scratches, chips, etc., is removed by polishing special mixtures, such as a mixture of linseed oil and an alcohol wipe damaged surface, then polish with a soft cloth and polish cover. Similarly, careful to handle the white spots on the hot dishes, such as a cloth soaked in gasoline. Recovered and the damaged surface of the mold, and filled in with various substances. After complete removal of defects can proceed to the final processing – polishing or varnishing.