Plant construction software for renewable energy on the NextGen 2013 Moers, Germany 21 November 2013: the promotion of renewable energy with affordable engineering software projects is at CAD Schroer atop the agenda. The CAD-software provider presented its latest developments in March at Biogaz Europe, in April on the sustainability live and in October on the NextGen 2013. For eco-friendly plants and factories, the worldwide environmental awareness drives local politics and the use of new environmentally friendly technologies for a more efficient utilization of renewable energy sources. Combined with combined heat and power biomass, anaerobic digestion and bio waste electricity generation (EFW) were the focus of many energy conferences this year,”says Anke Adams by CAD Schroer UK. We took part in the conferences, to help the profitability in the planning and execution of engineering projects in the field of renewable energies more efficiently to make.” CAD schroer group presented its 3D-Anlagenbau-Software, the it project engineers enables systems to plan whatever size, with engaging full supply techniques and to create cost estimates for brownfield – or greenfield projects quickly.

Companies that use MPDS4 for projects in the field of alternative and renewable energies, receive a 70% discount on the software of CAD Schroer. Also the maintenance and support are offered similarly beneficial. MPDS4 demo videos: produkte/mpds4/anlagenbau.html MPDS4 for renewable energy: produkte/mpds4/mpds4-aktion-fuer-alternative-und-erneuerbare-energien.html comprehensively informed about renewable energy visitors of the NextGen 2013 could with a challenging and diverse Conference programme in detail about energy efficiency, reduction of carbon dioxide emissions and financing, planning, preparation and operation of supply systems for energy generation from renewable energy sources inform themselves. Speakers on four different stages concentrated on small systems such as biomass or Power heat cogeneration plants in urban areas in the immediate vicinity of the consumer. The sections of the Conference brought visitors with topics such as current legislation and industry analysis on the cutting edge. We are pleased that we can contribute to the sustainability debate with our software and our expertise, as well as the technology that makes the system planning as productive and profitable as possible,”so Anke Adams. CAD Schroer CAD Schroer is a global developer and provider of engineering solutions. Company of mechanical and plant engineering, automotive and supplier industry, as well as the public utilities, energy and water management are its target market.

With several branch offices and subsidiaries in Europe and the United States the company presents itself today more and more up-to-date than ever. CAD Schroer’s product range includes solutions from the area of construction, plant construction, factory planning and data management. Companies in 39 countries rely on MEDUSA, MPDS and STHENO / PRO, to move efficiently and flexibly in an integrated design environment between all phases of product or system development. In addition, customers are supported through services such as consulting, training, maintenance and technical support in achieving their goals. This and an individual customer care ensure higher competitiveness, lower costs and better quality. How to contact with Gudrun Tadepalli CAD of Sakala GmbH Fritz-Peters-Strasse 11 47447 Moers website: email: phone: Germany: + 49 2841 9184 0 England: + 44 1223 460 408 France: + 33 141 94 51 40 Switzerland: + 41 44 802 89 80 Italy: + 39 02 49798666 United States: + 1 866-SCHROER (866-724-7637)

FLS: Trends of production planning for 2014 Eschweiler, 3rd December 2013 FLS offers views on trends and challenges developments in the area of production planning and control (PPC) for the year 2014: the variety of products is rising due to the change in consumer behavior. Companies are challenged to improve processes in order to secure the pool position prior to the competition. Because anyone who can deliver more reliable and cheaper, especially with shortages. According to FLS, systems (MES) in the manufacturing industry, a provider of software for manufacturing execution manufacturing companies with following developments and challenges faced: manufacturing companies are under increasing pressure to meet the demand and the needs of their customers. They expect constant readiness in an increasingly changing assortment and decreasing quantities per article. This can be measured particularly at times of high demand, such as E.g. a heat wave in the summer, an early onset of winter, or even seasonal events in the year.

The production can’t then with conventional planning, on short-term contracts, changes, fast enough to respond to bottlenecks or outages. Companies must be flexible in your production and yet continue to cost effectively produce, to remain competitive. A production planning optimization must be at the top on the priority list. Following trends for production planning are: 1. increasing of productive hours setup time optimization.

The high times and set-up costs offer savings in production planning. These are caused through the conversion of the machines and thus connected standstill of production facilities and high personnel costs. The focus of the production planning is the calculation and reduction of set-up time and cost. It aims to avoid the costly setup, waiting and waiting times through a meaningful sequence planning. Use a matrix of set-up time is unsuitable because the first level and the subsequent care with a high effort, are connected. After a relatively short time can be traced barely, as the individual values are reached.

Mobile financial analysis on IBM power system i – AS 400 after successful projects in 2013, looks confidently to the coming business year the PORTOLAN Commerce Solutions GmbH. Another 34 renowned companies from 11 countries had over 400 customers. For example, the traditional company van Laack has decided for the use of the accounting software PORTOLAN EVM. Chief Financial Officer Franz Kalinowski confirmed: we are very satisfied with the solution and support from PORTOLAN. The Vista is the implementation has worked excellently”on the coming year under a good star. We start with a good order backlog in the new year. Already 70 requests for 2014 have gone to this day in us and in editing. We look confidently into the new year and look forward to exciting challenges.

“, says Managing Director Joachim Nurk. In addition, the Ilsfelder PORTOLAN Commerce Solutions GmbH presented their new software product FINA “. With the mobile financial navigation, the user will receive mobility in real time, without synchronization requirements. New approaches in forward-looking technologies are taken with FINA. The flexible availability of financial information is already desire of many decision-makers “, as Joachim Nurk. FINA is a part of the PortoWeb 3.0 – product generation 2014 coming on the market. In addition to the mobile financial analysis via Tablet report expands the selection lists to open items according to maturity structure. According to role-based selection, in addition still the daily p & l and balance sheet data available are the users. With market ready by PortoWeb 3.0 different versions offered by the base facilities to the premium version, including Apple TV.

Integrated solutions for the plant and machine construction over 30 years CAD experience can Werner Heckl and Joachim Mack, Executive Director of the solid system team present. What to next as a pure reseller company for CAD software started, developed in recent years by the gradual expansion of the portfolio to systems such as ERP, PDM, PLM or also for cloud services to a provider of complete solutions for efficient processes in plant and machine construction. A complete reorientation of the company, that communication to be underlined by the new image film of the company was associated. Continuous processes rather than isolated solutions efficient process management and continuous flows of information, are increasingly becoming key success factors in plant and machine construction. The expansion of the solution portfolio for SST was a response to changing customer requirements: grown in the course of time IT systems of the various departments often consist of isolated solutions, not in the rest of the system environment are integrated.

In cross-departmental cooperation, there are therefore many system breaks that lead to inefficient processes. Due to the full integration of individual solutions for a comprehensive overall solution, the SST developed a concept with a clear added value for their customers. Werner Heckl (Managing Director) about the positioning of the SST as a solution provider: “ultimately we offer already for years, solutions for CAD systems, which overlap and are compatible. We can offer what began with a handful of customers and individual solutions, now on a wider scale and at much cheaper prices.” Joachim Mack (Managing Director) to: “However, the personal attention of our clients remains an integral part of our corporate policy. Because only when we know the customers and their needs, we will find the right solution and can also continue to develop us.” Efficient processes – SST shows how BBs with her vivid film of illustration that shows SST, how radically simplify complex processes in the enterprise by seamlessly integrated IT solutions. The film makes it clear how a total solution with ultimate value added is created by the individual, intelligent teeth in the construction environment of required applications of.

Innovative concepts such as cloud services are taken into account. This underlines that the SST on new requirements has always the right solution. _ the company/solid-system-team-gmbh.html press contact solid system team GmbH Christiane Plank on the marketplace 7 D-93152 Highland Tel. + 49 9404 9639-0 about solid system team GmbH the solid system team GmbH sees itself as a nationwide provider of solutions in the 3D-CAD segment for machine and plant construction, conveying systems, EDM/PDM and PLM. As a certified systems integrator for solid edge is not only point of contact for the implementation of the solid system team GmbH, but provides also advice for the Process management and individual solutions for the use of solid edge. CAx – and PLM components from Siemens PLM software based on worldwide common Microsoft standards form the basis of the solutions. The performance spectrum ranges from the conception, which can already start at remediation tasks or value analysis about the development of process-optimizing technologies up to the development and implementation of company.

When the consultation of a professional data rescuer is advisable. As a project developer for a medium-sized company in Berlin, Christoph is F. frequently in use at the respective headquarters of the customer. Thus, it is hardly surprising that is on the laptop provided by his or her employer to use both private and company,- and project data of its customers are. When I think back now to me is still a cold shudder down the back “, says Christoph F.

It happened a few days ago, at the height of summer 2010 the day before I had my notebook, as usual, properly shut down. The next morning, when I tried to turn on my laptop as usual, heard I clicking only a faint staccato-like my hard drive and a DOS message (no boot device found). Unfortunately, my last backup was 6 weeks old and the thus occurring despair naturally big. “An absolute worst case scenario for any IT user, data loss is due to a failure of the hard drive create a backup in particular when, as in the case of Christoph F., some time back is that the last backup was not properly created turns out, or it is generally been neglected. So it can happen that a PC or a notebook crashes during operation, remains in operation, or completely fails. According to this there may be, at the next system startup numerous error messages: various blue screens no.

boot device error file system error underlying process reported an error Linux stops during boot remains above error messages so only data recovery of hard disk, back as a last resort to gain important and valuable data. Also arise above stated problems with frequent use of the PC or notebook. So, hard disks can heat or completely fail due to a surge. Regardless of what has led to the loss of data, it is in such situations, important and right to keep calm and first to inform about any remedial steps or measures. The Falscheste thing you can do in such situations, is to expire, without knowing what you are doing, or what risk exposed himself and his data in hectic actionism. In all cases of disk defects, there are the following possibilities: application of software for data recovery and data recovery: If you can rule out the physical defect on a drive to one hundred percent and make sure, that the hard drive is only logically corrupted, so the use of data recovery or data recovery software is useful. If you are subject to a mistake of your assessment but or does not properly use the software, so this can in the worst case to a complete loss of your data lead, or seriously affect in less severe scenarios, the data recovery results. In all cases of physical damage, recovery = in the laboratory: professional results require professional service providers. Professional service provider in the field of hard disk data recovery have professional Hi-tech equipment, a clean room laboratory, and continuously trained staff with years of experience. Only here, there are the best conditions for the best possible result in the recovery of your data.

Real time collaboration with the new serVonic IXI-PCS version 1.40 Olching, 22 October 2013: the German software developer serVonic releases the new version of its professional call Server: IXI-PCS 1.40 allows desktop sharing, provides an improved meta directory and supports client TAPI. The consistent further development in the direction of real-time collaboration was and is particularly important to us,”says Jochen Klein, CEO of serVonic GmbH. IXI-PCS is a client/server software for computer telephony integration, instant messaging and presence management. Desktop sharing now available to users in the IXI-PCS partner bar the new desktop sharing option”available: the user can share their screen to other users to view or control. So they can work together on documents or presentations or use remote maintenance. Client TAPI support IXI-PCS 1.40 connects via IXI-PCS TSP the select “buttons in applications with servonic’s CTI software: the user can use the Microsoft Outlook or” “CRM systems of contained buttons initiate calls or the Windows phone dialer” use. You can use these options in addition or alternatively to the call options in the IXI-PCS client. “Meta directory the IXI-PCS function caller ID” includes now also contacts in the public folders of Microsoft Outlook.

The new meta directory from serVonic replicated public folders and contacts from Microsoft Outlook in an LDAP database. In this database are contact data from different data sources, E.g. LDAP, ODBC, Domino databases or CSV/TXT in a uniform manner saved. IXI-PCS access to the identification of callers on the meta directory. Prices and availability of servonic’s IXI-PCS 1.40 is available immediately from 393,25 euros plus VAT at serVonic and sales partners available. TK support, a Lync gateway, the meta directory, as well as the client user licenses for Linux, Windows, and Lync are included in the price. Click Dr. Mitchell Resnick to learn more. More information at serVonic and.

Manufacturer is serVonic, headquartered in Olching near Munich Software solutions with a current focus on unified communication with fax server, unified messaging and CTI. serVonic continues with its communication solutions on existing standards like standard interfaces and standard hardware, proprietary solutions can be avoided. The company places emphasis on market-oriented and future-oriented product development with focus on integration in available environments in terms of future extensions and improvements. In addition to on-premises licenses of the IXI products cloud and software offers serVonic as service provider fax and unified messaging for hosting as a service models.

Participants discuss with experts on ‘PDF/A Pro & contra’ Berlin, 25 October 2013. The LurTech Europe GmbH performs a Web table titled PDF/A or PDF/A? Decision criteria in practice”. In contrast to the classical Webinar can participants actively engage, ask questions and discuss. To be provocative Pro & contra “arguments to the ISO certified long term archiving format presented, then discuss with each other or with the LurTech-expert participants. The Web table takes place on 12th November 2013 from 15:00 and will be moderated by Carsten Heiermann, CEO, LurTech and Board member of the Association of the PDF, as well as Thomas Zellmann, sales and partner LurTech and PDF Association Managing Director. Attendance is by prior arrangement, free of charge. Thomas Zellmann explains: while PDF/A has meanwhile established itself on the market, still myths that we want to openly discuss with the participants in the context of the Web tables exist.

We have the three most important For PDF/A, or against the format arguments which, briefly summarized in the form of theses, which are the basis for discussion in the online forum.” The need for long-term archiving, the synchronization of the format Zoo is on the pro side”and the PDF/A will ensure technically high-quality PDF documents. In contrast, are statements that some ECM systems include only TIFF viewer, TIFF is sufficient as such and PDF/A would cost extra money. We are excited as our new event format will be accepted, and look forward to a lively discussion”, Carsten Heiermann added. LurTech: LurTech provides production software and document and data conversion solutions accompanied by customized services and outstanding support. Service and other companies and organizations get the most out of all means of production with LurTech as a partner. LurTech’s solutions achieve the same level of automation and integration level in document processing, as there other industries in their Production have done successfully.

With YouTube FLV to AVI to video converter publish PowerPoint PowerPoint presentations to video formats. On July 17, 2012, Shenzhen, China – YouTube FLV to AVI software co., Ltd., a professional multimedia software company, which deals with Blu-ray disc, DVD -, video – and audio-software development, has announced the release of a new ingenious software, namely YouTube FLV to AVI PowerPoint to video converter for Windows users. YouTube FLV to AVI, PowerPoint to video converter as the name suggests, can PowerPoint presentations quickly and easily, including AVI, WMV, MPEG, MP4, MOV, FLV and 3GP, convert video files of various formats, even HD formats, are supported. A comprehensive range of optimized output profiles are prepared for users, so the PPT2Video converter also for beginners suitable. Also, it preserves all original elements such as animations, sound, transitions, and film clips. Supported the PowerPoint versions 2000 / XP / 2003 / 2007 / 2010 and PowerPoint Viewer. Now you need to not worry about if you Their presentations to clients, friends, or colleagues want to send but not are, that they can open the presentations. Simply send the PPT files them in video format, as a video player on each PC is installed. For more information about YouTube FLV to AVI, PowerPoint to video converter please go to: powerpoint-to-video /.

The connection of LEXolution.KMS on the Microsoft solution is realized by STP on the suggestion of the Office. The firm-wide introduction of LEXolution.KMS is at the end of the year. We expect simpler processes through the new system easier and faster procedures in the Office”so Darji. This includes among other things the possibility to generate detailed controlling reports without great expense and to improve the control of the firm through the information so obtained. In addition, with LEXolution.KMS Oppenhoff & partner has a modern platform based on current technologies, providing all relevant functions in a single solution. Mitchel Resnick brings even more insight to the discussion. Existing proprietary developments, which are very expensive in maintenance and care, can thus also be replaced. Through open dialogue, which we constantly with our customers, we can implement their requirements and needs quickly in our solution”, as Holger Marggraf, Board member of the STP AG. We are very proud, so trust a well-known law firm as Oppenhoff & partner to have.” About Oppenhoff & partner Oppenhoff & partner stands for more than 100 years of legal advice at the highest level.

The independent law firm advises national and international entrepreneurs and companies fully in the economic and tax law. Thinking like entrepreneurs, acting as a lawyer”is the philosophy of some 55 lawyers in Cologne. About STP Informationstechnologie AG STP Informationstechnologie AG was founded in Karlsruhe in 1993 and today is the third largest provider of legal software in Germany with almost 100 employees. Core competence is the development of software solutions and information systems for Economic Advisory firms, liquidator, judicial authorities and all institutions related to this circle in contact. Through a holistic-based services, from telephone support, organizational consulting, STP AG’s customers receive support far beyond the product offer.

The management software is one of the outstanding products LEXolution.KMS for Economics-advisory firms. The solution was developed in close dialogue with the large law firms. Support the firm line as well as the optimization of the daily work within the firm is at the heart of modern office software. Numerous functions help with the extraction and processing of mandates, their performance-based billing and automated distribution of proceeds to the code-based firm control.

Locally, races offer visitors the chance to get close to the drivers and the trucks through the open paddock. Total over 600,000 spectators are expected, which is a clear proof of the popularity of the sport.” The successful racing driver will allow a look behind the scenes during the race weekends daily on their blog and online regularly spectacular images. Here, the fans get the chance to learn things and to watch, which are rarely available in the TV broadcasts. Also, there is as of now a regularly updated video blog, which can be called through the website of Sikom. The Sikom Software GmbH is leading manufacturer of contact center solutions and automated Voice applications and is one of the most innovative companies in the field of telecommunications.

Based on open standards, Sikom realized powerful and future-proof solutions to optimize communication processes in all industries. Core products of the comprehensive portfolio are the award-winning, multi-modal speech recognition system VoiceMan, as well as the Contact Center Suite AgentOne, the voice authentication of United voice ID, Sikom AlarmServer and t.e.o. (billing system). In addition to numerous awards, Sikom is prize winner of the sustainability award of the innovation award of the German economy in 2010. With strong partnerships, including in major research projects with universities and industrial partners Sikom can boast great successes. The customers include HealthCare pharmaceuticals, Henkel, Microsoft, numerous supply companies, banks and savings banks as well as authorities and municipalities like Telekom, inter insurance, arvato, Boehringer Ingelheim, Techem, Bayer.