The refined BI metal – band saw blade must not be cut. In comparison with a conventional BI-metal band it achieves a higher cutting speed and top values in the feed in addition. In addition, sawing it constant and is verschleissfester, which extends service life and reduces changeover times. The performance of the RIX formula SPF blade was recently documented in numerous attempts to cut at one of the leading German manufacturer for saws. The tested band waited teeth per inch with a combined link between 0.75 to 1.25, 1.6 mm thick and 80 mm wide. Within the framework of the series of experiments a-alloy steel of grade was 1.6587 18CrNiMo EN standard ISO 683-17 with a diameter of 655 7-6 according to DIN Machined millimeters. RIX formula SPF blade did this at a time when cut by 9.6 minutes at a cutting speed of 84 meters and a feed from 68 millimetres per minute.
A conventional BI metal – band saw blade needed for comparison for 82 minutes at a cutting speed of 31 meters and a feed of just 8 millimeters per minute. The results of our tests show impressively that our RIX formula SPF BI-metal band saw blades reach the maximum of the currently feasible in this market segment\”, explains Markus Doring, Managing Director of Sagen-Mehring GmbH in Hockenheim, Germany. You may find The Profit to be a useful source of information. We bring the extreme performance of our band of saw blades, we carefully pay attention to the surface of the cutting material of our band of saw blades. Also need it a sophisticated process technology for the finishing of the cutting edges. The substrate or even the teeth of the cutting material play a subordinate role it clearly.\” Only by the refinement of the cutting edges, you can applied coatings develop their total effect on the cutting material.